Home > Knowledge > Content

Start the engine and gradually increase the speed

- Feb 01, 2018 -

The process parameters of the measured value with a given value of comparison, after the deviation of a certain regulation according to the law to produce an output signal to promote the actuator to eliminate the deviation, so that the parameter remains in the vicinity of a given value or a predetermined change in the controller .

With a dry battery and battery, ammeter in series, connected to the conditioner battery terminal. Start the engine and gradually increase the speed, the closure of the contactor contact to see the meter pointer to extend the machine. If the ammeter pointer to the "+" bias, revealed that the closing voltage is high, should weaken the spring tension; if the ammeter pointer to the "-" biased swing, revealed the closure voltage is low, should increase the spring tension. As repeated adjustment, until the interrupter contacts closed when the ammeter pointer simply does not swing, then reveal the closing voltage suitable.

With two batteries and batteries, ammeter in series, connected to the conditioner battery terminal. Start the engine and gradually increase the speed. Watch the ammeter pointer when the regulator is functioning. If the ammeter pointer to the "+" bias, revealing the performance of the pressure value is high, should reduce the spring tension; if the ammeter pointer to the "-" biased swing, reveal the performance of the regulator is low, should increase the spring tension. This repeated adjustments until the regulator from the effect, the ammeter pointer simply does not swing, then reveal the appropriate voltage regulator.

The reason for this adjustment is: dry battery and battery in series, the necessary potential, and the generator is announced the necessary voltage, when the two are not equal to occur when the current. The former is higher than the latter, then the ammeter pointer to "-" bias, otherwise it is "+" bias. As long as the potential difference between the two is equal, the ammeter pointer does not swing.


Related Industry Knowledge

Related Products

  • PVC Stabilizer for WPC
  • PVC Processing Aid P-801
  • External Lubricant LU-74(G-74)
  • Application for PVC Lubricants
  • PVC Resin
  • Recycled PVC