Email : info@pvcadd.com | ABOUT US | KNOWLEDGE | CONTACT US
loading
| Availability: | |
|---|---|
| Quantity: | |
Chlorinated polyethylene CPE-135A
Description
CPE-135A is widely used for rigid PVC products, such as PVC window profile, pipe, fence, siding and so on, WPC product, etc.
Key property
Excellent elongation rate at break
Endow PVC finish products with good toughness
Increase the corner welding strength of PVC profiles.
Product index
Property | Test method | Specification | Typical data |
Appearance | --- | White powder | White powder |
Chlorine content, % | GB/T7139-2002 | 35±2.0 | 36 |
Melting Enthalpy, J/g | -- | ≤ 2.0 | 1.3 |
Volatile content, % | ASTM D5668 | ≤ 0.4 | 0.19 |
Sieve residue (0.9mm Sieve), % | GB/T2916 | ≤ 2.0 | 0.1 |
Impurity particles, piece/100g | HG/T2704-2010 | ≤ 50 | 9 |
Ash Content,% | GB528-2009 | ≤4.5 | 3.2 |
Tensile strength, Mpa | GB528-2009 | ≥8.0 | 12 |
Hardness, Shore A | GB/T2411-2008 | 52±3.0 | 55 |
Chlorinated polyethylene CPE-135A
Description
CPE-135A is widely used for rigid PVC products, such as PVC window profile, pipe, fence, siding and so on, WPC product, etc.
Key property
Excellent elongation rate at break
Endow PVC finish products with good toughness
Increase the corner welding strength of PVC profiles.
Product index
Property | Test method | Specification | Typical data |
Appearance | --- | White powder | White powder |
Chlorine content, % | GB/T7139-2002 | 35±2.0 | 36 |
Melting Enthalpy, J/g | -- | ≤ 2.0 | 1.3 |
Volatile content, % | ASTM D5668 | ≤ 0.4 | 0.19 |
Sieve residue (0.9mm Sieve), % | GB/T2916 | ≤ 2.0 | 0.1 |
Impurity particles, piece/100g | HG/T2704-2010 | ≤ 50 | 9 |
Ash Content,% | GB528-2009 | ≤4.5 | 3.2 |
Tensile strength, Mpa | GB528-2009 | ≥8.0 | 12 |
Hardness, Shore A | GB/T2411-2008 | 52±3.0 | 55 |
