Email : info@pvcadd.com | ABOUT US | KNOWLEDGE | CONTACT US
loading
PVC Heat Stabilzier CS-50
Polymer Additives
| Availability: | |
|---|---|
| Quantity: | |
Ca-Zn Stabilizer CS-50
Description
Ca-Zn stabilizer CS-50 is Calcium-zinc based heat stabilizer used for PVC Profiles and Pipes application. It has outstanding weather-ability which help to keep the primary colors of PVC products.
Key property
Excellent thermal stability.
Stable process ability and larger process window.
No pollution to the environment.
Product index
Item | Index |
Appearance | White powder |
Bulk density | 0.4-0.5g/cm³ |
Particle size (40 mesh sieve) | ≥98.5％ |
Melting temperature | 90~150℃ |
Recommended Application
The recommended dosage of CS-50 is 3~ 5 PHR.
Adding Ca-Zn stabilizer CS-50 together with the PVC resin and other additives into the high-speed mixer.
Keep the temperature at about 120-125℃ for 8 ~ 10minutes.
Cooling down the mixed material to normal temperature.
Move into extruders and start extrusion process.
If you need to increase or decrease of CaCo3 content or want to adjust the lubrication system, please contact our technical service team by info@pvcadd.com.
Storage
The product should be stored in cool and dry surroundings.
The shelf life is two years, it can be still used if qualified by inspection after shelf life.
Ca-Zn Stabilizer CS-50
Description
Ca-Zn stabilizer CS-50 is Calcium-zinc based heat stabilizer used for PVC Profiles and Pipes application. It has outstanding weather-ability which help to keep the primary colors of PVC products.
Key property
Excellent thermal stability.
Stable process ability and larger process window.
No pollution to the environment.
Product index
Item | Index |
Appearance | White powder |
Bulk density | 0.4-0.5g/cm³ |
Particle size (40 mesh sieve) | ≥98.5％ |
Melting temperature | 90~150℃ |
Recommended Application
The recommended dosage of CS-50 is 3~ 5 PHR.
Adding Ca-Zn stabilizer CS-50 together with the PVC resin and other additives into the high-speed mixer.
Keep the temperature at about 120-125℃ for 8 ~ 10minutes.
Cooling down the mixed material to normal temperature.
Move into extruders and start extrusion process.
If you need to increase or decrease of CaCo3 content or want to adjust the lubrication system, please contact our technical service team by info@pvcadd.com.
Storage
The product should be stored in cool and dry surroundings.
The shelf life is two years, it can be still used if qualified by inspection after shelf life.
